Bidet Installation, Fresh Water Bidet SKU:BIDET-C by SQUATTY POTTY
Squatty Potty Refresh-it Fresh Water Bidet Toilet Seat Attachment 17 x 4.5 x 9.8 inches
Item Link: Fresh Water Bidet $25.99 each.
Step 1: Remove Toilet Seat
Remove the toilet seat by unscrewing the screws. Place bidet on toilet and align the back screw holes with the seat coupling holes.
Step 2: Screw Seat Back on Toilet
Place the toilet seat on top of the bidet and screw onto the toilet bowl.
Step 3: Connecting Water Supply
Turn off the water supply and connect the water tank to the fill valve adaptor. Replace the water supply connecting to the tank with the flexible hone. After they have been connected, attach the fill valve to the flexible hone.
Step 4: Removing Wing Nut
Remove the wing nut from the fill valve adaptor and plug it into the plastic tube. Afterwards, tighten the wing nut to ensure the plastic tube is secure.
Step 5: Connect to the Bidet
Connect the opposite end of the plastic tube to the bidet. If the pipe does not cover the hole, then the bidet will leak. Tighten the wing nut afterwards to ensure everything is secure.